FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 269)

showaltitude(8)
System Administration 303
NAME showaltitude - display the altitude state of the system
SYNOPSIS showaltitude
showaltitude -h
DESCRIPTION The showaltitude(8) command displays the current settings for the altitude state
of the system.
The displayed altitude value is a multiple of 100 meters.
Privileges You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
The setaltitude(8) command sets the altitude of the server.
EXAMPLES EXAMPLE 1 Displays the altitude of the system.
EXIT STATUS The following exit values are returned:
SEE ALSO setaltitude(8)
-h Displays usage statement.
XSCF> showaltitude
1000m
0 Successful completion.
>0 An error occurred.