FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 389)

showsnmp(8)
System Administration 455
NAME showsnmp - display the configuration information and current status of the SNMP
agent
SYNOPSIS showsnmp
showsnmp -h
DESCRIPTION showsnmp (8) displays the configuration and information and current status of the
SNMP agent. This includes: agent status, port, system location, contact and
description, traphosts, SNMP version, and any enabled MIB modules.
Privileges You must have platadm or platop privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXAMPLES EXAMPLE 1 Displaying SNMP Information for a System That Has Not Been Set Up
EXAMPLE 2 Displaying SNMP Information for a Disabled System Set Up With
SNMPv3 Trap Host
-h Displays usage statement.
XSCF> showsnmp
Agent Status: Disabled
Agent Port: 161
System Location: Unknown
System Contact: Unknown
System Description: Unknown
Trap Hosts: None
SNMP V1/V2c: None
Enabled MIB Modules: None
XSCF> showsnmp
Agent Status: Disabled
Agent Port: 161
System Location: SanDiego
System Contact: [email protected]
System Description: FF1
Trap Hosts:
Hostname Port Type Community String Username Auth Protocol
-------- ---- ---- ---------------- -------- --------------
host1 162 v3 n/a jsmith SHA
SNMP V1/V2c: None
Enabled MIB Modules: None