FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 300)

showdcl(8)
278 XSCF Reference Manual • Last Revised November 2007
The showdcl(8) command can display the following information that is part of a
domain component list:
DID Domain ID
LSB LSB number. The displayed number is an integer ranging from
00 to 15.
XSB XSB number corresponding to the LSB. The displayed number
has the following format:
x–y
where:
x
An integer from 00–15.
y An integer from 0–3.
Status Domain status. One of the following status is displayed.
Additional information may be displayed.
Powered Off
Power is off.
Panic State
A panic occurred, and the domain is in the reset state.
Shutdown Started
The power-off process is starting.
Initialization Phase
OpenBoot PROM initialization is in progress.
OpenBoot Executing Completed
The system is in the OpenBoot PROM (ok prompt) state.
Booting/OpenBoot PROM prompt
The operating system is booting. Or due to the domain
shutdown or reset, the system is in the OpenBoot PROM
running state or is suspended in the OpenBoot PROM (ok
prompt) state.
Running
The operating system is running.