FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 186)

sethostname(8)
198 XSCF Reference Manual • Last Revised June 2007
EXTENDED
DESCRIPTION
■ To reflect the host name and the DNS domain name to XSCF, execute the
applynetwork
(8) command. After reflected the information, use the
rebootxscf (8) command to reset XSCF to complete the setting.
■ To enable the set host name and DNS domain name, execute the
applynetwork
(8) command and reset the XSCF.
■ The currently set host name and DNS domain name of the XSCF unit can be
checked by using the shownetwork(8) command.
EXAMPLES EXAMPLE 1 Sets the host name scf0-hostname for XSCF unit 0.
EXAMPLE 2 Sets the DNS domain name example.com for XSCF unit.
EXIT STATUS The following exit values are returned:
SEE ALSO applynetwork(8) , rebootxscf(8), showhostname(8)
XSCF> sethostname xscf#0 scf0-hostname
XSCF> sethostname -d example.com
0 Successful completion.
>0 An error occurred.