FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 207)

setnetwork(8)
System Administration 225
address Specifies an IP address. The specified value is a set of four
integer values delimited by the period (.). The following address
form is accepted:
xxx.xxx.xxx.xxx
xxx An integer from 0–255. Zero suppression
can be used to specify the integer.
interface Specifies the network interface to be configured. One of the
following values can be specified:
■ For midrange server:
For XSCF unit 0 :
xscf#0-lan#0 XSCF-LAN#0
xscf#0-lan#1 XSCF-LAN#1
xscf#0-if Interface between XSCF units (Inter SCF
Network; ISN)
For abbreviation:
lan#0 an abbreviattion of XSCF-LAN#0
lan#1 an abbreviattion of XSCF-LAN#1
■ For high-end server:
For XSCF unit 0 :
xscf#0-lan#0 XSCF-LAN#0
xscf#0-lan#1 XSCF-LAN#1
xscf#0-if Interface between XSCF units (Inter SCF
Network; ISN)
For XSCF unit 1 (when a duplicated configuration is used):
xscf#1-lan#0 XSCF-LAN#0
xscf#1-lan#1 XSCF-LAN#1
xscf#1-if ISN
For takeover IP address:
lan#0 takeover IP address for XSCF-LAN#0
lan#1 takeover IP address for XSCF-LAN#1