FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 361)

showmonitorlog(8)
System Administration 425
NAME showmonitorlog - display the contents of monitoring messages in real time
SYNOPSIS showmonitorlog
showmonitorlog -h
DESCRIPTION The showmonitorlog(8) command displays the contents of monitoring messages
in real time.
When the showmonitorlog(8) command is executed, the XSCF shell is occupied
for the display of monitoring messages. When a monitoring message is registered,
the contents of the message are displayed.
To stop the real-time display, press the Ctrl + C key combination.
Privileges You must have one of the following privileges to run this command:
platadm , platop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXAMPLES EXAMPLE 1 Displays the contents of a monitoring message in real time.
EXIT STATUS The following exit values are returned:
-h Displays usage statement.
XSCF> showmonitorlog
Apr 13 12:32:16 XXXXX Alarm: /CMU#1,/CMU#0/DDC#0:ANALYZE:SC-IOU I/F fatal
error 0x00000000;
:
:
0 Successful completion.
>0 An error occurred.