FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 309)

showdevices(8)
System Administration 357
EXAMPLE 2 Displays detail information of the physical devices and their available re-
sources in domain ID 0.
EXIT STATUS The following exit values are returned:
SEE ALSO addboard(8) , deleteboard(8), moveboard(8), setdcl(8), setupfru(8),
showboards(8) , showdcl(8), showfru(8)
XSCF> showdevices -v -d 0
CPU:
----
DID XSB id state speed ecache
00 00-0 40 on-line
2048 4
00 00-0 41 on-line 2048 4
00 00-0 42 on-line 2048 4
00 00-0 43 on-line 2048 4
00 01-0 50 on-line 2048 4
00 01-0 51 on-line 2048 4
00 01-0 52 on-line 2048 4
00 01-0 53 on-line 2048 4
Memory:
-------
board perm base domain target deleted remaining
DID XSB mem MB mem MB address mem MB XSB mem MB mem MB
00 00-0 2048 1290 0x000003c000000000 4096 00-1 250 1500
00 01-0 2048 0 0x000002c000000000 4096
IO Devices:
----------
DID XSB device resource usage
00 00-0 sd0
00 00-0 sd1
00 00-0 sd2
00 00-0 sd3 /dev/dsk/c0t3d0s0 mounted filesystem "/"
00 00-0 sd3 /dev/dsk/c0t3s0s1 dump device (swap)
00 00-0 sd3 /dev/dsk/c0t3s0s1 swap area
00 00-0 sd3 /dev/dsk/c0t3d0s3 mounted filesystem "/var"
00
00-0 sd3 /var/run mounted filesystem "/var/run"
00 00-0 sd4
00 00-0 sd5
00 00-0 sd6
0 Successful completion.
>0 An error occurred.