FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 377)

showpowerupdelay(8)
System Administration 443
NAME showpowerupdelay - display the current settings for the warm-up time of the
system and wait time before system startup
SYNOPSIS showpowerupdelay
showpowerupdelay -h
DESCRIPTION The showpowerupdelay(8) command displays the current settings for the warm-
up time of the system and wait time before system startup.
The following settings are displayed:
Privileges You must have one of the following privileges to run this command:
platadm , platop, domainadm, domainmgr, domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
The setpowerupdelay(8) command sets the warm-up time of the system and a
wait time before system startup.
EXAMPLES EXAMPLE 1 Displays the warm-up time of the system and wait time before system star-
tup.
EXIT STATUS The following exit values are returned:
SEE ALSO setpowerupdelay(8)
warmup time Warm-up time
wait time Wait time before system startup
-h Displays usage statement.
XSCF> showpowerupdelay
warmup time : 10 minute(s)
wait time : 20 minute(s)
0 Successful completion.
>0 An error occurred.