FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 425)

testsb(8)
System Administration 499
mounted.
EXIT STATUS The following exit values are returned:
SEE ALSO addfru(8) , deletefru(8), replacefru(8), setupfru(8), showboards(8),
showfru(8)
XSCF> testsb -c all
Initial diagnosis is about to start. Continue? [y|n] : y
Ignore warmup-time and air-conditioner-wait-time, Continue?[y|n] : y
SB power on sequence started.
0end
Initial diagnosis started. [1800sec]
0..... 30..... 60..... 90.....120end
Initial diagnosis has completed.
SB power off sequence started. [1200sec]
0.end
SB powered off.
XSB Test Fault
---- ------- --------
00-0 Passed Normal
01-0 Passed Normal
02-0 Passed Normal
03-0 Passed Normal
0 Successful completion.
>0 An error occurred.