FUJITSU SPARC ENTERPRISE M4000 User Manual
Page 312
showdomainmode(8)
360
XSCF Reference Manual • Last Revised June 2007
EXTENDED
DESCRIPTION
■
If the Mode switch on the operator panel is set to "Service", the settings have
the following values regardless of the domain mode displayed by the
showdomainmode
(8) command:
■
Diagnostics Level
: operates as the showdomainmode(8) command
display
■
Secure Mode
: off
■
Autoboot
: off
■
When the OpenBoot PROM environmental variable 'auto-boot?' has been set
to false, the auto boot function is disabled.
■
The setdomainmode(8) command sets a domain mode.
EXAMPLES
EXAMPLE 1
Displays the current state of the operation mode for domain ID 0.
EXIT STATUS
The following exit values are returned:
SEE ALSO
setdomainmode(8)
XSCF>
showdomainmode -d 0
Host-ID :0f010f10
Diagnostic Level :min
Secure Mode
:on
Autoboot
:on
0
Successful completion.
>0
An error occurred.