FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 301)

showdcl(8)
System Administration 279
If the -v option is specified, the following information is added:
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
Cfg-policy Degradation range applicable for an error detected during an
initial diagnosis of hardware. Any of the following is displayed:
FRU
Degradation of a component (default)
XSB Degradation of an XSB.
System Degradation of a domain
No-Mem Whether to omit the use of memory on a domain. Either of the
following is displayed:
True
Omits the use of memory on a domain.
False Does not omits the use of memory on a
domain (default).
No-IO Whether to omit the use of I/O devices on a domain. Either of
the following is displayed:
True
Omits the use of I/O devices on a domain.
False Does not omit the use of I/O devices on a
domain (default).
Float Whether to set a priority for the specified LSB as a floating
board, relative to other boards. Either of the following is
displayed:
True
Gives a higher priority to the LSB to become
a floating board.
False Does not give a higher priority regarding
floating boards (default).
platadm , platop, fieldeng
Can execute the command for all domains.
domainadm , domainmgr, domainop
Can execute the command only for accessible domain.