FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 180)

setdualpowerfeed(8)
190 XSCF Reference Manual • Last Revised January 2007
EXAMPLE 2 Enables dual power feed mode in the system. Before rebooting the system,
a message is displayed.
EXIT STATUS The following exit values are returned:
SEE ALSO showdualpowerfeed(8)
XSCF> setdualpowerfeed -s enable
disable -> enable
NOTE: Dual power feed will be enabled the next time the platform is powered
on.
0 Successful completion.
>0 An error occurred.