FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 125)

prtfru(8)
System Administration 123
NAME prtfru - display FRUID data on the system and External I/O Expansion Unit
SYNOPSIS prtfru [-c] [-l] [-M] [-x] [ container]
prtfru -h
DESCRIPTION prtfru is used to obtain FRUID (Field-Replaceable Unit Identifier) data from the
system. Its output is a tree structure, echoing the path in the FRU tree to each
container. When a container is found, the data from that container is printed in a
tree structure as well.
prtfru without any arguments prints the FRU hierarchy and all of the FRUID
container data. prtfru prints to the screen. Output can be redirected to a file.
Note – FRU information from the domains is not available using this command.
Privileges You must have fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
OPERANDS The following operands are supported:
-c Prints only the containers and their data. This option does not
print the FRU tree hierarchy.
-h Displays usage statement.
When used with other options or operands, an error occurs.
-M Displays text by page. This option provides a function that is the
same as that of the more command.
-l Prints only the FRU tree hierarchy. This option does not print the
container data.
-x Prints in XML format with a system identifier (SYSTEM) of
prtfrureg.dtd
.
container The name of the particular hardware that holds data, in the FRU
hierarchy. Either the name or path/name of a container is
displayed in the -l option. The container operand must be in
upper case and is applicable to the External I/O Expansion Unit
FRUs.