FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 73)

flashupdate(8)
System Administration 59
EXAMPLE 2 Updates the entire firmware to version from 1010 to 1020.
EXAMPLE 3 When XSCF unit is duplicated configuration, synchronizes the firmware
versions after replacement of the XSCF unit.
EXIT STATUS The following exit values are returned:
SEE ALSO version(8)
XSCF> flashupdate -c update -m xcp -s 1020
The XSCF will be reset. Continue? [y|n] : y
XCP update is started (XCP version=1020:last version=1010)
OpenBoot PROM update is started
OpenBoot PROM update has been completed (OpenBoot PROM version=01010001)
XSCF update is started (SCF=0, bank=1, XCP version=1020:last version=1010)
XSCF download is started (SCF=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last
version=01010001)
XSCF download has been completed (SCF=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last
version=01010001)
:
:
XSCF download is started (SCF=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=07:version=01010002:last
version=01010001)
XSCF download has been completed (SCF=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=07:version=01010002:last
version=01010001)
XSCF update has been completed (SCF=0, bank=1, XCP version=1020:last
version=1010)
XSCF update is started (SCF=0, bank=0, XCP version=1020:last version=1010)
XSCF download is started (SCF=0, bank=0, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last
version=01010001)
XSCF download has been completed (SCF=0, bank=0, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last
version=01010001)
:
:
XSCF download is started (SCF=0, bank=0, XCP version=1020:last
version=1010, Firmware Element ID=07:version=01010002:last
version=01010001)
XSCF download has been completed (SCF=0, bank=0, XCP version=1020:last
version=1010, Firmware Element ID=07:version=01010002:last
version=01010001)
XSCF is rebooting to update the reserve bank
XSCF> flashupdate -c sync
0 Successful completion
>0 An error occurred.