FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 329)

showhardconf(8)
System Administration 299
NAME showhardconf - display information about field replaceable unit (FRU) installed in
the system
SYNOPSIS showhardconf [-u] [-M]
showhardconf -h
DESCRIPTION showhardconf (8) command displays information about each FRU.
The following information is displayed:
■ Current configuration and status
■ Number of installed FRUs
■ Domain information
■ External I/O Expansion Unit information
■ Name properties of PCI cards
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:.
useradm , platadm, platop, fieldeng
Can run this command for all domains.
domainadm , domainmgr, domainop
Can run this command only for your accessible domains.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-M Displays text by page. This option provides a function that is
the same as that of the more command.
-u Displays the number of FRUs installed in each unit. For CPU
modules, operating frequencies are displayed. For memory
units, the capacity of each memory unit is displayed. If this
option is omitted, the current configuration and status
information regarding FRUs and domain information are
displayed.