FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 44)

applynetwork(8)
24 XSCF Reference Manual • Last Revised June 2007
EXAMPLE 2 On the midrange server, reflects the information that has been set for the
XSCF network. Automatically answers "y" to all prompts.
EXAMPLE 3 Reflects the information that has been set for the XSCF network. Suppress-
es prompts, and automatically answers "y" to all prompts.
EXIT STATUS The following exit values are returned:
SEE ALSO rebootxscf(8) , sethostname(8), setnameserver(8), setnetwork(8), setroute(8)
XSCF> applynetwork -y
The following network settings will be applied:
xscf#0 hostname :hostname-0
DNS domain name :example.com
nameserver :10.23.4.3
interface :xscf#0-lan#0
status :up
IP address :10.24.144.214
netmask :255.255.255.0
route :-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :
Continue? [y|n] : y
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
XSCF> applynetwork -q -y
0 Successful completion.
>0 An error occurred.