FUJITSU SPARC ENTERPRISE M4000 - Manual (Page 209)

setnetwork(8)
System Administration 227
EXAMPLE 4 Sets the IP address 192.168.10.128 on ISN on the XSCF unit 0. By default,
255.255.255.0 is set for the net mask.
EXAMPLE 5 Sets the IP address 192.168.11.10 and net mask 255.255.255.0 for XSCF-
LAN#0 on XSCF unit 1.
EXAMPLE 6 Sets the IP address 192.168.1.10 and net mask 255.255.255.0 for the takeover
IP address of XSCF-LAN#0.
EXIT STATUS The following exit values are returned:
SEE ALSO applynetwork(8) , shownetwork(8)
XSCF> setnetwork xscf#0-if 192.168.10.128
XSCF> setnetwork xscf#1-lan#0 -m 255.255.255.0 192.168.11.10
XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.1.10
0 Successful completion.
>0 An error occurred.