Ms-dos/windows 3.1x driver installation, Initio, Autoexec.bat – Initio INI-9090U User Manual
MS-DOS/Windows 3.1x Driver Installation
The D or d values are used to Disable the time out mechanism. If the time out mechanism is
disabled then faulty hardware can lock up the system.
This option is used to exclude particular CD-ROM drives. Excluded CDROM
drives are identified by specifying the host adapter, target id and lun. These values are
spereated by a colon. Groups of CDROM drives (or wild cards) can also be identified.
Below are examples of the different ways CDROM drives can be excluded:
This will exclude the drive on Host Adapter 0, with target ID 1
and lun 2.
This will exclude the drive on Host Adapter 0, with target ID 2
and ANY lun
This will exclude ALL drives on Host Adapter 0.
SAMPLE CONFIG.SYS AND AUTOEXEC.BAT FILES
These samples assume that the user has loaded the Initio drivers in the following
The first line loads the ASPI manager and the second line loads the CDROM driver
specifying the device name INICD001.
This line will load the Microsoft supplied mscdex.exe file instructing it to attach to the
CD-ROM device driver INICD001.