Initio INI-9090U - Manual (Page 49)

45
initio
®
Changing to the INI-9XXX as the bootable host adapter:
1 Insert the INI-9XXXU/9XXXUW DRIVER DISK 2 diskette into floppy drive.
2 Type: “installpkg” under command prompt and press <ENTER>. The system will ask
you what packages you want to install.
• Type: i91u <ENTER>
3 Change the mscsi file:
• cd /etc/conf/cf.d < ENTER >
• cp mscsi mscsi.bak < ENTER >
• vi mscsi < ENTER >
In the example below, The XXXX would be replaced with i91u.
ha attach number ID lun
XXXX Stp 0 2 0
XXXX Sdsk 0 0 0
XXXX Srom 0 5 0
4 Rebuild the UNIX kernel:
• . /link_unix < ENTER >
5 You have completed the link procedure for the Initio device driver. Exit and reboot
the system.
SCO Unix Driver Installation