Initio INI-9090U - Manual (Page 55)

51
initio
®
Linux Drivers
12
Overview
The INI-9090U Linux device driver may be found on the INI-9XXXU/9XXXUW DRIVER DISK
1 . The Linux drivers developed by Initio will be installed on the disk drive used for system
initialization. It is strongly suggested that you see the README file within the Linux Folder
before continuing with the system configuration or change. Please read the instructions
carefully.
Initio also offers the S.u.S.E (GmBh) Linux Software Package. These files can be found on
Initio’s Technical Support website (www.initio.com/support.htm). They consist of the
following files:
boot This is a floppy image of a boot disk with Initio's Linux drivers.
initio-2.0.32.gz This is a gzip patch file used to patch kernel sources with Initio's
Linux drivers.
Installation Instructions:
cp initio-2.0.32.gz /usr/src/linux
cd lusr/src/linux
zcat initio-2.0.32.gz | patch -p1 -s
rescue This is a floppy image of a rescue disk.
If you are still having problems installing the Linux driver for your particular system, you
can go directly to our Technical Support website (http://www.initio.com). There, you
will get the latest updates and information regarding Linux drivers.