IBM VERSION 5 SY44-5902-05 - Manual (Page 125)

Resource name
The Name or Resource name field contains a description of the resource that is
associated with the entry.
The system assigns a resource name, but that name might be changed to a new
value by the customer. Depending on the data, the following priority scheme is
used for the name field:
1.
Device name
2. Controller name
3. Line name
4. Network interface name
5. A name that is created based on the data in the entry
The following names are created:
Subsystem Possible Names
Processor System
Storage Storage
Workstation LWS
Communications COMM
Power Power
Software PGM
To select the Display report option, type 5 in the Opt (option) field for a specific
resource and press the Enter key. A detailed report for that resource appears. If
more than one entry has the same log ID, they are presented in the order of
occurrence.
Log Analysis Report
From . . : 08/26/94 10:00:00 To . : 08/27/94 10:00:00
Type option, press Enter.
5=Displayreport 6=Print report
System Resource Resource
Opt Ref Code Date Time Class Name Type
_ 2661B000 08/26/94 12:53:20 Perm CTL01 2661
_ 2661B000 08/26/94 13:03:19 Perm CTL01 2661
_ 2661B000 08/26/94 13:15:44 Perm CTL01 2661
_ 2661B000 08/26/94 13:43:37 Perm CTL01 2661
_ 2661B000 08/26/94 13:49:22 Perm CTL01 2661
_ 6380FF04 08/26/94 14:13:43 Perm DC01 6380
F3=Exit F5=Refresh
F11=View description F12=Cancel
Figure 49. Example Log Analysis Report
Chapter 3. Product Activity Log 111