IBM VERSION 5 SY44-5902-05 - Manual (Page 5)

Contents
Safety and Environmental Notices . . . vii
Danger Notices . . . . . . . . . . . . . vii
Product Recycling and Disposal . . . . . . . viii
Battery Return Program . . . . . . . . . . viii
Environmental Design . . . . . . . . . . viii
Caution Notices . . . . . . . . . . . . viii
Attention Notices . . . . . . . . . . . . ix
Laser Safety Information . . . . . . . . . . x
Laser Safety Information (for IBM Fiber Optic
Link Products).
. . . . . . . . . . . . x
About Service Functions (SY44-5902-03) xi
Who should read this book . . . . . . . . . xi
Conventions and terminology used in this book . . xi
Prerequisite and related information . . . . . . xi
iSeries Navigator . . . . . . . . . . . xii
How to send your comments . . . . . . . . xii
Chapter 1. Dedicated Service Tools
(DST) . . . . . . . . . . . . . . . . 1
Introduction . . . . . . . . . . . . . . 1
Dedicated Service Tools requirements . . . . . 1
System paging environments . . . . . . . . . 2
Stand-alone paging (non-paging) . . . . . . 2
Limited paging . . . . . . . . . . . . 2
Full paging . . . . . . . . . . . . . . 3
Accessing Dedicated Service Tools . . . . . . . 4
Performing an IPL to DST . . . . . . . . . 4
Changing a service tools user ID. . . . . . . 5
Resetting QSECOFR service tools user ID. . . . 6
Performing an IPL to DST for secondary partitions 6
Pressing the System Request Key while the system
is operational .
. . . . . . . . . . . . 7
Selecting Function 21 while the system Is
operational .
. . . . . . . . . . . . . 7
Performing an alternate IPL to DST (type D IPL) . 8
Function keys (in DST) . . . . . . . . . . . 9
Exiting Dedicated Service Tools. . . . . . . . 10
DST options . . . . . . . . . . . . . . 10
Installing Licensed Internal Code . . . . . . 11
Installing the operating system . . . . . . . 11
Perform an IPL . . . . . . . . . . . . 11
Work with Licensed Internal Code . . . . . . 11
Work with disk units . . . . . . . . . . 13
Work with Dedicated Service Tools environment 23
Start a service tool . . . . . . . . . . . 28
Perform automatic installation of the operating
system .
. . . . . . . . . . . . . . 39
Save Licensed Internal Code. . . . . . . . 40
Work with save storage and restore storage. . . 40
Work with remote service support . . . . . . 40
Work with system partitions . . . . . . . . 42
Work with system capacity . . . . . . . . 42
Work with system security . . . . . . . . 42
Chapter 2. Hardware Service Manager 45
Introduction . . . . . . . . . . . . . . 45
Hardware Service Manager options . . . . . . 46
Packaging hardware resources . . . . . . . 47
Logical hardware resources . . . . . . . . 49
Locate resource by name . . . . . . . . . 50
Failed and non-reporting resources . . . . . 53
System Power Control Network (SPCN) . . . . 55
Battery power unit information . . . . . . . 55
Work with service action log . . . . . . . 56
Display label location work sheet . . . . . . 58
Device concurrent maintenance . . . . . . . 58
Collecting information and performing functions
from the Hardware Service Manager displays .
. . 61
Change resource details . . . . . . . . . 61
Concurrent maintenance . . . . . . . . . 63
Create frame information . . . . . . . . . 64
Debug the resource . . . . . . . . . . . 66
Display address . . . . . . . . . . . . 67
Display associated resources . . . . . . . . 67
Display card gap information . . . . . . . 69
Display failed resources . . . . . . . . . 70
Display hardware contained within package . . 70
Display location information. . . . . . . . 71
Display non-reporting resources . . . . . . 71
Display resources associated with IOP . . . . 72
Display resource details . . . . . . . . . 73
Display resources requiring attention . . . . . 77
Display resource status . . . . . . . . . 78
Display serial/part numbers, logical address, and
status/resource name information .
. . . . . 79
Display system bus resources . . . . . . . 79
Display system information . . . . . . . . 82
Display unresolved locations . . . . . . . 82
Print. . . . . . . . . . . . . . . . 83
Refresh the display . . . . . . . . . . . 83
Remove non-reporting resource information . . 83
Reserve frame space . . . . . . . . . . 84
Using High-Speed Link (HSL) specific options. . 84
Verify resources . . . . . . . . . . . . 92
Symbols on the Hardware Service Manager displays 93
Printing the System Configuration List .
. . . . 93
Verification procedures . . . . . . . . . . 95
Hardware Service Manager — Verify . . . . . 95
Verify optical storage unit . . . . . . . . 96
Verify diskette . . . . . . . . . . . . 96
Verify tape. . . . . . . . . . . . . . 96
Verify communications . . . . . . . . . 97
Chapter 3. Product Activity Log . . . . 99
Introduction . . . . . . . . . . . . . . 99
Product Activity Log (PAL). . . . . . . . . 100
The Service Action Log (SAL) . . . . . . . 100
Product Activity Log location . . . . . . . 101
© Copyright IBM Corp. 1997, 2002 iii