IBM VERSION 5 SY44-5902-05 - Manual (Page 85)

The Hardware contained within package option is available only on the Packaging
Hardware Resources displays. Use this option to view the next level of hardware
for the packaging hardware resources. This option functions only when a plus sign
(+) appears after the description. For more information on symbols, see “Symbols
on the Hardware Service Manager displays” on page 93.
From logical displays:
The Display hardware contained within package option is available only on the
Packaging Hardware Resources displays. To access this option from the logical
displays, you must select the Associated packaging resource(s) option (see “Display
associated resources” on page 67).
If the resource is at the lowest level of packaging (contains no other packages), the
following message displays:
The selected resource cannot be expanded.
Display location information
From packaging displays:
Each packaging hardware resource has associated location information. To display
specific locations, select the Display detail option.
From logical displays:
Location information that appears on the logical displays shows the logical
address. Physical location information is available only on the Packaging Hardware
Resources displays. To access physical location information from the logical
displays, you must select the Associated packaging resource(s) option (see “Display
associated resources” on page 67).
Display non-reporting resources
From packaging displays:
The Non-reporting resources function key appears on the Packaging Hardware
Resources display (see “Packaging hardware resources” on page 47). It allows you
to view a list of the hardware that was detected in the past but is not being
detected by the system now. A non-reporting resource indicates that one of the
following has occurred:
v The resource might have been removed from the server. (For more information
on removing the resource, see “Remove non-reporting resource information” on
page 83.)
v The resource might be powered off.
v There is a problem in the signal path between the system and the device.
v There is a resource failure.
You can also select the Failed and non-reporting resources option on the Hardware
Service Manager display to view non-reporting resources (see “Failed and
non-reporting resources” on page 53).
From logical displays:
Chapter 2. Hardware Service Manager 71