IBM VERSION 5 SY44-5902-05 - Manual (Page 84)

If the system detects gaps in the logical sequence, the following display appears:
The Card Position column shows the card location that is empty. One or more card
positions might be empty for a single card enclosure.
If no gaps are detected, the following message displays:
No card position gaps were detected in the system
Display failed resources
From packaging displays:
The Failed resources function key is available only on the Logical Hardware
Resources displays.
From logical displays:
The Failed resources function is available only under the Logical hardware resources
option. This function key displays a list of all failed logical hardware resources. A
failed resource indicates that one of the following occurred:
v There is a problem in the signal path between the system and the device.
v There is a resource failure.
You can also select the Failed and non-reporting resources option on the Hardware
Service Manager display to show failed resources (see “Failed and non-reporting
resources” on page 53).
If the system contains no failed resources, the following message displays:
No failed logical hardware resources were found.
Display hardware contained within package
From packaging displays:
DisplayCard Gap Information
Resource Card
Description Type-Model Frame ID Name Position
System Unit 9406-500 1 FR01 2
6
7
8
F3=Exit F5=Refresh F6=Print F12=Cancel
Figure 24. Example Display Card Gap Information display
70 Service Functions V5R2