IBM VERSION 5 SY44-5902-05 - Manual (Page 83)

This display shows all the packaging hardware resources that are associated with
one logical resource. The first line provides a description, type, model, and
resource name of the logical resource with which all packaging hardware resources
are associated.
Options on the Packaging Resources Associated with a Logical Resource display
are the same options that are available for packaging hardware resources:
v Change detail
v Concurrent maintenance
v Remove
v Display detail
v Associated logical resource(s)
v Hardware contained within package
Note: The logical and packaging hardware resources have unique resource names.
Packaging hardware resource names are used only by the system. Service
representatives and customers use the logical resource names.
Display card gap information
From Hardware Service Manager display:
The Display card gap information function key appears on the Hardware Service
Manager display. I/O processor cards must be installed in a specified logical order.
Note: SPD system busses require that no empty card positions exist between I/O
processors. PCI system busses may have empty card positions.
Select this option to display the gaps in the logical card sequencing. If the cards are
not installed in order, server performance might be affected, the cards might be
unusable, or SRCs that provide incorrect FRU information might appear.
Packaging Resources Associated with a Logical Resource
Logical resource:
Type-Model Resource Name
Communications IOP 2620-001 CC08
Type options, press Enter.
2=Change detail 3=Concurrent Maintenance 4=Remove 5=DisplayDetail
8=Associated logical resource(s) 9=Hardware contained within package
Opt Description Type-Model Frame ID Resource Name
_ Communications IOP 2620-001 1 P17
F3=Exit F5=Refresh F6=Print
F10=Non-reporting resources F12=Cancel F13=Unresolved locations
Figure 23. Example Packaging Resources Associated with a Logical Resource display
Chapter 2. Hardware Service Manager 69