IBM VERSION 5 SY44-5902-05 - Manual (Page 251)

Model
This field shows the model number of the frame.
Serial number
This field shows the serial number of the frame.
Load ID
This field shows the load identifier of the frame Licensed Internal Code.
Reference code
This field shows the error code for the frame. Starting with version 4 release 5, this
field will always be 0000.
Alert status
This field shows the status of the frame SPCN node.
Extended status
This field provides additional status information for the frame.
AROS part number
This field shows the alterable read-only storage (AROS) part number.
Responding to polls
This field indicates whether the frame is responding to polling requests from the
Primary SPCN node. Field values are
Yes or No.
Primary frame
This field indicates whether this is the primary frame. Field values are Yes or No.
Power sequence complete
This field indicates whether the frame power sequencing completed. Field values
are
Yes or No.
Fault
This field indicates whether a power or functional fault currently exists. Field
values are
Yes or No.
UEPO switch
This field indicates whether the unit emergency power-off (UEPO) switch is on or
off.
Cable type for connector J15
This field indicates the presence or type of cable. Field values are None, Copper, or
Optical.
Cable type for connector J16
This field indicates the presence or type of cable. Field values are None, Copper, or
Optical.
Cable type for connector J18
This field indicates whether a cable for connector J18 is present. Field values are
Yes or No.
If you select option 5 (Display detail) next to the entry for a unit, the following
display appears with detailed information about the unit:
Chapter 9. System Architecture and Configuration 237