IBM VERSION 5 SY44-5902-05 - Manual (Page 99)

The Work With High Speed Link (HSL) Resources display appears when you select
the High Speed Link resources option on the Logical Hardware Resources display.
The Work With High Speed Link (HSL) Resources display allows you to display
information and perform functions that are specific to HSL.
The options below are unique for HSL:
v Display detail (when you select it from HSL Loop) - Select this option to display
the details of the logical hardware resource. The information is device-dependent
(meaning it may be different depending on the hardware resource selected.)
v Display port information - Select this option to display the physical cabling
between resources within a given HSL loop.
v Resources associated with loop - Select this option to display the selected loop and
a list of all resources logically attached to it. If more than one loop is selected
with this option, the list will contain all of these loops and their logically
attached resources.
Display detail
When you select the Display detail option for an HSL loop, an HSL Loop, an HSL
I/O Bridge, or a Remote HSL NIC, one of the following three screens will appear. A
detailed description of the fields on these screens follows the displays.
Display details on an HSL loop resource: Choosing the Display details option on
an HSL loop resource will cause the following screen to appear. This screen is also
displayed when
F7 is selected and the previous resource is the beginning of the
loop and when
F8 is selected and the next resource is the beginning of the loop.
Work With High-Speed Link (HSL) Resources
Type options, press Enter.
1=Enable HSL OptiConnect 2=Change detail 3=Disable HSL OptiConnect
4=Remove 5=Displaydetail 8=Associated packaging resources
9=Resources associated with loop 12=Displayport information
HSL
Resource Hardware Loop OptiConnect
Opt Description Name Status Number Status
_ Local HSL NIC BCC01 Operational Disabled
_ HSL Loop SB01 Operational 256 Not Available
_ HSL Loop SB02 Operational 257 Enabled
_ Local HSL NIC BCC02 Operational Disabled
_ HSL Loop SB03 Operational 258 Not Available
_ HSL Loop SB04 Operational 259 Disabled
_ Local HSL NIC ? BCC03 Unknown Disabled
_ HSL Loop ? SB05 Unknown 260 Not Available
_ HSL Loop ? SB06 Unknown 261 Not Available
F3=Exit F5=Refresh F6=Print F8=Exclude non-reporting resources
F10=Non-reporting resources F12=Cancel
Figure 32. Example Work With High Speed Link (HSL) Resources display
Chapter 2. Hardware Service Manager 85