Chapter 2. hardware service manager, Introduction – IBM VERSION 5 SY44-5902-05 User Manual
Page 59

Chapter 2. Hardware Service Manager
Hardware Service Manager options .
Packaging hardware resources .
Failed and non-reporting resources
System Power Control Network (SPCN) .
Battery power unit information .
Display label location work sheet .
Device concurrent maintenance .
Collecting information and performing functions
from the Hardware Service Manager displays .
Display associated resources .
Display card gap information .
Display hardware contained within package .
Display non-reporting resources
Display resources associated with IOP
Display resources requiring attention .
Display serial/part numbers, logical address, and
status/resource name information .
Display system bus resources .
Logical hardware resources on system bus
(frames with a PCI system bus).
Remove non-reporting resource information
Using High-Speed Link (HSL) specific options.
Resources associated with loop .
Symbols on the Hardware Service Manager displays 93
Printing the System Configuration List .
Hardware Service Manager — Verify .
Optical storage unit test descriptions .
Communications test descriptions .
Introduction
You can select the Hardware service manager option from the Start a Service Tool
display. It allows you to display and work with system hardware (logical or
packaging) and debug input-output processors (IOP) and devices.
© Copyright IBM Corp. 1997, 2002
45