IBM VERSION 5 SY44-5902-05 - Manual (Page 89)

Location text
This field shows the text location information that was entered manually by the
user. All packages, except stand-alone units, display the location of the frame
which contains them. The stand-alone units display the text information for
themselves.
Frame ID
This is the identifier of the frame enclosure.
EIA location
This field shows the Electronics Industries Association (EIA) location within the
frame. The information is manually entered by the user from the change detail
screen. This number represents where the bottom edge of the hardware is located
within the frame. This field does not apply to all frames.
Card position
This shows the position of the card within the enclosure. A letter might be
included to specify the position of a second level card.
Device position
This field shows the position of the device within hardware package.
Height in EIA units
This number represents the height of the packaging hardware resource as
measured in Electronics Industries Association (EIA) units. This value was
manually entered by the user on a Change Detail screen. This field does not apply
to all frames.
Width in mm
This number represents the width of this packaging hardware resource as
measured in millimeters. It was manually entered by the user on a Change Detail
screen.
Manufacturing ID
This field shows the identifier from the manufacturer. The ID of the packaging
hardware resource is reported by the system or entered manually by the user.
Actual manufacturing ID
This field shows the actual manufacturing ID of the packaging hardware resource.
Entered manually by the user, it is used to identify a hardware resource that
emulates an IBM device.
Alternate remote telephone
This shows the telephone number of the alternate remote service machine. This
field is for informational use only. It is not used by the system.
Alternate service node
This is the network node address of the alternate service provider. This field is for
informational use only. It is not used by the system.
Alternate service telephone
This shows the telephone number of the alternate service provider. This field is for
informational use only. It is not used by the system.
Service provider
This field defines the service provider for this resource. If IBM is not the service
provider, this field should contain the service provider’s name. This field is for
informational use only. It is not used by the system.
Chapter 2. Hardware Service Manager 75