Siemens Brodersen MC55 AT - Manual (Page 119)

MC55_ATC_V04.00 Page 119 of 475 3/17/06
Confidential / Released
5.7 AT^SPWD Change Password
The
AT^SPWD
command provides the same functions as
AT+CPWD
. The major difference between both com-
mands is that, apart from the different prefixes "^SPWD" and "+CPWD", the
AT^SPWD
command includes addi-
tional functions dedicated to the Customer SIM Lock. Please note that this feature is only supported by
specifically pre-configured MC55 modules and, therefore, not part of the standard "MC55 AT Command Set".
Ordering information and a detailed description of the "Customer SIM Lock" feature can be requested from Sie-
mens. All other functions and parameters of
AT^SPWD
are described in Section 5.6 ,
AT+CPWD
.
Each password is a string of digits the length of which varies with the associated facility. The test command
returns a list of pairs which represent the available facilities and the maximum length of the associated password.
See also AT commands
AT+CLCK
and
AT^SLCK
for more detail on the various lock features.
Syntax
Note
• When changing the PIN2 (
<facility>
="P2") it is recommended to check the new state of PIN2 using the
AT+CPIN2
command.
Test Command
AT^SPWD=?
Response(s)
^SPWD:
list of supported (
<facility>
,
<password length>
)
OK
Write Command
AT^SPWD= <facility>
,
<old password>
[,
<new password>
]
Response(s)
New password has been registered for the facility lock function.
OK
If parameter
<old password>
was not correct:
+CME ERROR 16 (+CME ERROR: incorrect password)
If the password for the selected
<facility>
has been invalidated due to too many failed attempts:
+CME ERROR ...
If error is related to ME functionality:
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
% % % % % % ! ! !