26 at+ftm transmit data – Siemens Brodersen MC55 AT User Manual
Page 328
Advertising
MC55_ATC_V04.00
Page 328 of 475
3/17/06
Confidential / Released
12.26
AT+FTM Transmit Data
The
command causes the TA to transmit data, using one of the modulation schemes defined in Section
.
An ERROR response code results if the write command is issued while the modem is on-hook. The test com-
mand can be used in on-hook or off-hook mode to check the modulation schemes supported by MC55.
Syntax
Notes
• Used for Fax Class 1 only.
•
= 3 is not possible
Test Command
AT+FTM=?
Response(s)
s)
OK
Write Command
Response(s)
CONNECT
If error is related to ME functionality:
ERROR
Reference(s)
PIN
ASC0 ASC1
MUX1
MUX2
MUX3 Charge
Last
TIA/EIA-578
!
%
!
%
!
!
!
!
!
Advertising