Siemens Brodersen MC55 AT - Manual (Page 273)

MC55_ATC_V04.00 Page 273 of 475 3/17/06
Confidential / Released
11.5 AT+CGEREP GPRS event reporting
The write command enables or disables sending of unsolicited result codes, "
+CGEV
" from MT to TE in the case
of certain events occurring in the GPRS MT or the network.
<mode>
controls the processing of unsolicited result
codes specified within this command.
<bfr>
controls the effect on buffered codes when
<mode>
1 or 2 is
entered. If a setting is not supported by the MT, ERROR or +CME ERROR: is returned.
Read command returns the current
<mode>
and buffer settings.
Test command returns the modes and buffer settings supported by the MT as compound values.
Syntax
Unsolicited Result Codes
URC 1
+CGEV: REJECT <PDP_type> , <PDP_addr>
A network request for PDP context activation occurred when the MT was unable to report it to the TE with a
+CRING unsolicited result code and was automatically rejected.
URC 2
+CGEV: NW REACT <PDP_type> , <PDP_addr> , [ <cid> ]
The network has requested a context reactivation. The
<cid>
that was used to reactivate the context is pro-
vided if known to the MT.
URC 3
+CGEV: NW DEACT <PDP_type> , <PDP_addr> , [ <cid> ]
The network has forced a context deactivation. The
<cid>
that was used to activate the context is provided
if known to the MT.
URC 4
+CGEV: ME DEACT <PDP_type> , <PDP_addr> , [ <cid> ]
The mobile equipment has forced a context deactivation. The
<cid>
that was used to activate the context is
provided if known to the MT.
Test Command
AT+CGEREP=?
Response(s)
+CGEREP:
(list of supported
<mode>
s), (list of supported
<bfr>
s)
OK
Read Command
AT+CGEREP?
Response(s)
+CGEREP: <mode>
,
<bfr>
OK
Write Command
AT+CGEREP=
[
<mode>
[,
<bfr>
]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
GSM 07.07 % % % % % % ! ! !