Mode, Eonsoperator, Servprovider – Siemens Brodersen MC55 AT User Manual

Page 69: Nitzut, Nitztz, Nitzdst, Vmcounter, 2 display

Advertising
background image

MC55_ATC_V04.00

Page 69 of 475

3/17/06

Confidential / Released

If the type is 2, 4 or 5,

AT+COPS

with the appropriate

<mode>

displays the same operator name.

0

Indicator is deregistered, i.e. no such indicator event report (URC) will be

issued.

<mode>

=0 is power-up and factory default of indicators defined by

AT^SIND

only.

1

Indicator is registered.
• Indicator event reports are controlled via

AT+CMER

.

• All indicators can be registered or deregistered via

AT^SIND

, but different

default settings apply: Power-up and factory default of the indicators sup-

ported by

AT+CIND

is

<mode>

=1, while, as stated above, indicators defined

by

AT^SIND

only are set to

<mode>

=0.

2

Query the registration status and the current value of a single indicator type.

If delivered by the network: Number of new voice messages sent as part of the Voice Message Waiting Indicator.

Refer to

<indDescr>

.

Operator in format which depends on the type associated to the operator name. Refer to

<indValue>

.

Service Provider Name according to the status settings (SIM Service No. 17) in the SIM Service Table (SST) of

the SIM.

Universal Time delivered as part of the "nitz" Indicator. Refer to

<indDescr>

.

Time Zone delivered as part of the "nitz" Indicator. Refer to

<indDescr>

.

Adjustment for Daylight Saving Time as part of the "nitz" Indicator. Refer to

<indDescr>

.

Example

Activation and use of indicator "audio":

4

Any operator name stored internal to the ME (alphanumeric format, can con-

tain up to 16 characters).

5

Broadcast MCC-MNC (numeric format which consists of a 3-digit country code

plus a 2- or 3-digit network code).

<mode>

(num)

<vmCounter>

<eonsOperator>

<servProvider>

(str)

<nitzUT>

<nitzTZ>

<nitzDST>

AT^SIND="audio",1

You register the indicator "audio".

^SIND: audio,1,0

OK

AT+CMER=2,,,2

You activate the Indicator Event Report with

AT+CMER

.

OK

A set of all registered URCs is presented. (Please note that the example

includes the indicators registered due to the power-up default settings

of

AT+CIND

.)

+CIEV: battchg,5

+CIEV: signal,99

+CIEV: service,1

Advertising