Siemens Brodersen MC55 AT - Manual (Page 146)

MC55_ATC_V04.00 Page 146 of 475 3/17/06
Confidential / Released
7.19 AT+CRLP Select radio link protocol parameters for originated
non-transparent data calls
The
AT+CRLP
write command sets radio link protocol (RLP) parameters used when non-transparent data calls
are originated. The read command returns the current settings for the supported RLP version 0.
Syntax
Parameter Description
Interworking window size (IWF to MS)
0...61
(&F)
Mobile window size (MS to IWF)
0...61
(&F)
Acknowledgement timer (T1 in 10 ms units)
48...[78]
(&F) ...255
Re-transmission attempts N2
1...6
(&F) ...255
Test Command
AT+CRLP=?
Response(s)
+CRLP:
(list of supported
<iws>
s), (list of supported
<mws>
s), (list of supported
<T1>
s), (list of
supported
<N2>
s)
OK
Read Command
AT+CRLP?
Response(s)
+CRLP: <iws>
,
<mws>
,
<T1>
,
<N2>
OK
Write Command
AT+CRLP=
[
<iws>
[,
<mws>
[,
<T1>
[,
<N2>
]]]]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
GSM 07.07 ! % ! % ! ! ! ! !
<iws>
(num)(&W)(&V)
<mws>
(num)(&W)(&V)
<T1>
(num)(&W)(&V)
<N2>
(num)(&W)(&V)