Siemens Brodersen MC55 AT - Manual (Page 330)

MC55_ATC_V04.00 Page 330 of 475 3/17/06
Confidential / Released
12.28 AT+FVRFC Vertical Resolution Format Conversion
This command determines the DCE response to a mismatch between the vertical resolution negotiated for the
facsimile session and the Phase C data desired by the DTE.
Syntax
Parameter Description
0 Disable mismatch checking.
[2] Enable mismatch checking, with resolution conversion of 1-D data in the DCE,
and an implied
AT+FK
command executed on 2-D mismatch detection.
Note
• Used for Fax Class 2 only.
Test Command
AT+FVRFC=?
Response(s)
(list of supported
<vrfc>
s)
OK
Read Command
AT+FVRFC?
Response(s)
<vrfc>
OK
Write Command
AT+FVRFC= <vrfc>
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
EIA PN-2388 ! % ! % ! ! ! ! !
<vrfc>
(num)