Siemens Brodersen MC55 AT - Manual (Page 32)

MC55_ATC_V04.00 Page 32 of 475 3/17/06
Confidential / Released
2.3 AT&W Stores current configuration to user defined profile
AT&W
stores the currently set parameters to a user defined profile in the non-volatile memory.
Syntax
Parameter Description
[0] Number of profile
Notes
• The user defined profile will be restored automatically after power-up. Use
ATZ
to restore user profile and
AT&F
to restore factory settings. Until the first use of
AT&W
,
ATZ
works as
AT&F
.
•
AT&W
stores all global settings and the current local settings of the interface, on which the command is exe-
cuted.
• A list of parameters stored to the user profile can be found in Section 20.5 ,
AT Command Settings stor-
able with AT&W
.
Exec Command
AT&W
[
<value>
]
Response(s)
OK
ERROR/+CME ERROR <err>
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
V.250 ! % % % % % ! ! !
<value>
(num)