Siemens Brodersen MC55 AT - Manual (Page 309)

MC55_ATC_V04.00 Page 309 of 475 3/17/06
Confidential / Released
12.7 AT+FCQ Copy Quality Checking
This command controls Copy Quality checking when receiving a fax.
Syntax
Parameter Description
0 No copy quality checking. The ME will generate Copy Quality OK (MCF)
responses to complete pages.
[1] ME can check 1-D phase data. The connected application must check copy
quality for 2-D phase C data.
Note
• Used for Fax Class 2 only.
Test Command
AT+FCQ=?
Response(s)
(list of supported copy quality checking
<cq>
s)
OK
Read Command
AT+FCQ?
Response(s)
<cq>
OK
Write Command
AT+FCQ= <cq>
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
EIA PN-2388 ! % ! % ! ! ! ! !
<cq>
(num)