Siemens Brodersen MC55 AT - Manual (Page 130)

MC55_ATC_V04.00 Page 130 of 475 3/17/06
Confidential / Released
7.4 ATD><mem><n> Mobile originated call using specific memory
and index number
Syntax
Command Description
TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
Phonebook storage:
For detailed description of storages see
AT+CPBS
.
"FD" Fixed dialing phonebook
"SM" SIM phonebook
"ON" MSISDN list
"ME" Mobile Equipment Phonebook
"LD" Last number dialed phonebook
"MC" Missed (unanswered received) calls list
"RC" Received calls list
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by
AT+CPBR
.
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party)
i Deactivates CLIR (enables presentation of own phone number to called party)
Exec Command
ATD> <mem><n>
[
<mgsm>
];
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
V.250 % % § % § § ! ! !
<mem>
(str)
<n>
(num)
<mgsm>
(str)