Siemens Brodersen MC55 AT - Manual (Page 222)

MC55_ATC_V04.00 Page 222 of 475 3/17/06
Confidential / Released
10.1 AT^SICS Internet Connection Setup Profile
AT^SICS
serves to create and edit Internet connection profiles. A connection profile can be assigned to one or
more service profiles defined with
AT^SISS
, and thus, determines which type of connection is to be established
when opening a service profile with
AT^SISO
.
The
AT^SICS
read command requests the current settings of all Internet connection profiles. One line is issued
for every possible parameter of a given
<conParmTag>
"conType" value.
The
AT^SICS
write command specifies all parameters of a connection profile identified by
<conProfileId>
.
At first the type of Internet connection needs to be selected via
<conParmTag>
value "conType". This deter-
mines the applicability of all other
<conParmTag>
values related to this "conType" and automatically sets their
defaults. An exception is the
<conParmValue-alphabet>
which can be set before or after selecting "con-
Type".
To change the settings the write command needs to be executed for each single
<conParmTag>
. All profile
parameters set with
AT^SICS
are volatile.
MC55 supports the authentication methods PAP (Password Authentication Protocol), CHAP (Handshake
Authentication Protocol) or none. The method actually used for an Internet connection via CSD or GPRS is nego-
tiated at the LCP layer, i.e. it is negotiated with the remote peer at connection setup.
Table 10.1: Applicability of AT^SICS <conParmTag> values
Syntax
<conParmTag>
value CSD GPRS0
"conType" mandatory mandatory
"user" optional optional
"passwd" optional optional
"apn" ø mandatory
"inactTO" optional optional
"calledNum" mandatory ø
"dataType" mandatory ø
"dns1" optional optional
"dns2" optional optional
"alphabet" optional optional
Test Command
AT^SICS=?
Response(s)
OK
Read Command
AT^SICS?
Response(s)
^SICS: <conProfileId>
,
<conParmTag>
,
<conParmValue>
OK