Siemens Brodersen MC55 AT - Manual (Page 390)

MC55_ATC_V04.00 Page 390 of 475 3/17/06
Confidential / Released
16.5 AT^SPBC Find first matching entry in sorted phonebook
The
AT^SPBC
write command searches the current phonebook for the index number of the first (lowest) entry
that matches the character specified with
<schar>
. The
AT^SPBC
test command returns the list of phonebooks
which can be searched through with
AT^SPBC
.
CAUTION: Please note that
AT^SPBC
is assigned the same index as
AT^SPBG
or
AT^SPBS
which is not identical
with the physical location numbers used in the various phonebooks. Therefore, do not use the index numbers
retrieved with
AT^SPBC
to dial out or modify phonebook entries.
Syntax
Parameter Description
First character of the entry to be searched in the sorted list of phonebook entries.
In the active phonebook, the first (lowest) index number of an entry beginning with
<schar>
. As stated above,
the retrieved index number shall not be used to dial out or edit phonebook entries. If no matching phonebook
entry is found,
<index>
=0 will be returned.
Note
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1 , Restricted access to SIM data after SIM PIN authentication for further detail.
Test Command
AT^SPBC=?
Response(s)
^SPBC:
"FD","SM","ME"
OK
ERROR
+CME ERROR
Write Command
AT^SPBC= <schar>
Response(s)
^spbc: <index>
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
SIEMENS % % % % % % ! ! !
<schar>
(str)
<index>
(num)