Siemens Brodersen MC55 AT - Manual (Page 439)

MC55_ATC_V04.00 Page 439 of 475 3/17/06
Confidential / Released
19. Miscellaneous Commands
The AT Commands described in this chapter are related to various areas.
19.1 A/ Repeat previous command line
Syntax
Command Description
Repeat previous command line.
Notes
• Line does not need to end with terminating character.
• After beginning with the character "a" or "A" a second character "t", "T" or "/" has to follow. In case of using a
wrong second character, it is necessary to start again with character "a" or "A".
• If autobauding is active, the command
A/
cannot be used (see
AT+IPR
).
Exec Command
A/
Response(s)
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
V.250 ! % % % % % ! ! !