Siemens Brodersen MC55 AT - Manual (Page 442)

MC55_ATC_V04.00 Page 442 of 475 3/17/06
Confidential / Released
19.4 ATS5 Write command line editing character
Syntax
Command Description
This parameter setting determines the character recognized by TA as a request to delete the immediately pre-
ceding character from the command line.
Parameter Description
command line editing character
000...8
(&F) ...127
Read Command
ATS5?
Response(s)
<n>
OK
Write Command
ATS5= <n>
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
V.250 ! % % % % % ! ! !
<n>
(num)(&W)(&V)