Siemens Brodersen MC55 AT - Manual (Page 316)

MC55_ATC_V04.00 Page 316 of 475 3/17/06
Confidential / Released
12.14 AT+FET End a page or document
This command indicates that the current page or partial page is complete. An ERROR response code results if
this command is issued while the mode is on-hook.
Syntax
Parameter Description
Post Page Message Codes
1
Another document next
2 No morepages or documents
4 Another page, procedure interrupt
5 Another document, procedure interrupt
Note
• Used for Fax Class 2 only.
Write Command
AT+FET= <ppm>
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
EIA PN-2388 ! % ! % ! ! ! ! !
<ppm>
(num)