By the, Conpro, Fileid – Siemens Brodersen MC55 AT User Manual

Page 223: Conprofileid, Conparmtag, Lected via, Valu, Value, All profil, Sics

Advertising

MC55_ATC_V04.00

Page 223 of 475

3/17/06

Confidential / Released

Parameter Description

0...5

Internet connection profile identifier.

The

identifies all parameters of a connection profile, and,

when a service profile is created with

AT^SISS

the

needs

to be set as "conId" value of the

AT^SISS

parameter

Internet connection parameter.
"conType"

Type of Internet connection.

For supported values of

refer to

<conParmValue-con-

Type>

"alphabet"

Selects the character set for input and output of string parameters within a pro-

file.

The selected value is bound to the specific profile. This means that different

profiles may use different alphabets. Unlike other parameters the alphabet can

be changed no matter whether the

value "conType" has been

set.

For supported values of

refer to

<conParmValue-

alphabet>

"user"

User name string: maximum 32 characters (where "" is default).

"passwd"

Password string: maximum 32 characters (where ***** is default).

"apn"

Access point name string value: maximum 100 characters (where "" is default).

"inactTO"

Inactivity timeout value in seconds: 0 ... 2

-1, default = 20

Number of seconds the bearer remains open although the service no longer

needs the bearer connection.

"calledNum"

Called BCD number.

"dataType"

Data call type.

For supported values of

refer to

<conParmValue-

dataType>

"dns1"

Primary DNS server address (IP address in dotted-four-byte format).

This value determines whether to use the DNS server addresses dynamically

assigned by the network or a specific DNS server address given by the user.

"dns1" = "0.0.0.0" (default) means that the CSD or GPRS connection profile

uses dynamic DNS assignment. Any other address means that the Primary

DNS is manually set.

The default value applies automatically if no other address is set. Note that the

AT^SICS

read command only returns a manually configured IP address, while

the value "0.0.0.0" is not indicated at all, no matter whether assumed by default

or explicitly specified.