2 superscript notation for parameters and values, Superscript notation for parameters and values, Table 1.1 – Siemens Brodersen MC55 AT User Manual
Page 16: Symbols used to mark the type of parameters, Table 1.2, Table 1.3
MC55_ATC_V04.00
Page 16 of 475
3/17/06
Confidential / Released
1.3.2
Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type
Meaning
<param>
(num)
Parameter value must be numeric type
<param>
(str)
Parameter value must be string type
Parameter option
Meaning
<param>
(&W)
Parameter value will be stored with
<param>
(&V)
Parameter value will be displayed with
<param>
(ˆSNFW)
Parameter value will be stored with
<param>
(+CSCS)
Parameter value has to be (is) coded according to current setting of
(see
Value option
Meaning
[x]
Default value: if the parameter is omitted, the value 'x' will be assumed
x
(&F)
Factory default value, will be restored to 'x' with
x
(P)
Powerup default value of a parameter which is not stored at power down
x
(D)
Delivery default value of a parameter which cannot be restored automatically