Siemens Brodersen MC55 AT - Manual (Page 188)

MC55_ATC_V04.00 Page 188 of 475 3/17/06
Confidential / Released
8.14 AT+CPOL Preferred Operator List
The
AT+CPOL
read command returns the list of the preferred operators. The
AT+CPOL
write command allows to
edit the list of the preferred operators. If
<index>
is given but
<operator>
is left out, the entry is deleted. An
operator can be only once in the list.
Syntax
Parameter Description
The order number of the operator in the SIM preferred operator list.
2 Numeric format
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Test Command
AT+CPOL=?
Response(s)
+CPOL:
(list of supported
<index>
s), (list of supported
<format>
s)
OK
ERROR
+CME ERROR
Read Command
AT+CPOL?
Response(s)
+CPOL: <index>
,
<format>
,
<operator>
+CPOL:
...
OK
ERROR
+CME ERROR
Write Command
AT+CPOL= <index>
[,
<format>
,
<operator>
]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
GSM 07.07 % % % % % % ! ! !
<index>
(num)
<format>
(num)
<operator>
(str)