Siemens Brodersen MC55 AT - Manual (Page 339)

MC55_ATC_V04.00 Page 339 of 475 3/17/06
Confidential / Released
Notes
• The selected
<mem1>
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• The parameters
<ra>
and
<tora>
will only be displayed if parameter
<ra>
of the
AT^SSCONF
command is
set to 1.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 20.1 , Restricted access to SIM data after SIM PIN authentication for further detail.