Sanyo C4272R S/C User Manual

Page 32

Advertising
background image

X

32

3-9. Duct for Fresh Air

There is a duct connection part on side of the indoor

unit. (Fig. 3-16)

An optional air-intake plenum (including duct connection

box and flange) can be attached to the indoor unit.

(1) Accessories

Check that the following parts are in the box when

unpacking.

(2) Installation

Installation steps (a) to (d) are the same for both the

CMB-GSJ80U and the CMB-GSJ140U. The figure

illustrates installation of air-intake plenum to the

indoor unit. (Fig. 3-17)

(a) Installing the air-intake plenum

Set the air-intake plenum to the indoor unit taking care

not to set it in the wrong direction. (Fig. 3-17)

Fasten the air-intake plenum with the accessory screws.

(M5

× L5 in., 4 pcs) (Fig. 3-17)

(b) Installing the duct connection box

Fasten the duct connection flange to the duct connec-

tion box with the accessory screws.

(M4

× L1/2 in., 4 pcs) (Fig. 3-18)

Put the duct connection box into the rectangular hole of

the air-intake plenum and fasten it to both sides of the

indoor unit and plenum with the accessory screws.

(M4

× L1/2 in., 3 pcs) (Fig. 3-18)

(c) Installing the indoor unit

Install the indoor unit to the ceiling. (Install the indoor

unit according to items 3-1 to 3-6.)

CAUTION

When installing in a pre-

existing location, install the

indoor unit before installing

the duct connection box.

Air-intake plenum

Type

CMB-GSJ80U

PNR-XH2442

(XH(W)2672R)

CMB-GSJ140U

PNR-XH3642

(XH(W)3672R, XH(W)4272R)

Cord with socket

1

Connecting line. Not necessary for

(9P)

intaking fresh air.

Screw

4

Air-intake filter

(M5

× L5 in.)

(for fastening)

Screw

7

Duct connection flange / box

(M4

× L1/2 in.)

(for fastening)

Duct connection box

1

(for fresh air)

Duct connection flange

1

(for connecting fresh air duct)

Name

Remarks

ʻQʼty

For fresh air intake

2-5/32

8/

3-

2

e

l

o

h

8

/

1

ш

-

4

2

3

/

3

1

-

4

ш

Detail of fresh air intake

8P socket (red)
(ceiling panel side)

8P socket (red)

Clamper

Panel lead wire (8P)

Socket cover

Installation
screws

Air-intake
plenum

(electrical
component box)

Indoor unit

Fig. 3-16

Fig. 3-17

Unit: inch

07-115 SSHP_II 5/7/07 3:59 PM Page 32

Advertising
This manual is related to the following products: