National Instruments Data Acquisition Device E Series - Manual (Page 119)

Chapter 7 Digital Routing
E Series User Manual 7-2 ni.com
• AO Start Trigger Signal
• AO Sample Clock Signal
• AO Pause Trigger Signal
• AO Sample Clock Timebase Signal
• Counter 0 Source Signal
• Counter 0 Gate Signal
• Counter 0 Up/Down Signal
• Counter 1 Source Signal
• Counter 1 Gate Signal
• Counter 1 Up/Down Signal
• Master Timebase Signal
You also can control these timing signals by signals generated internally to
the DAQ-STC, and these selections are fully software-configurable.
Figure 7-1 shows an example of the signal routing multiplexer controlling
the ai/ConvertClock signal.