Getting started with ai applications in software – National Instruments Data Acquisition Device E Series User Manual
Page 80
Advertising
Chapter 2
Analog Input
© National Instruments Corporation
2-47
Getting Started with AI Applications in Software
You can use the E Series device in the following analog input applications:
•
Single-Point Analog Input
•
Finite Analog Input
•
Continuous Analog Input
You can perform these applications through DMA, interrupt, or
programmed I/O data transfer mechanisms. Some of the applications also
use start, reference, and pause triggers.
For more information about programming analog input applications and
triggers in software, refer to the NI-DAQmx Help or the LabVIEW 8.x Help.
Advertising